Review: A week or so with an Onyx Boox Poke3 e-reader
I think I may have finally found something even better than my trusty Kobo
For a while, I’ve had a Kobo Aura One, a rather fine ebook reader that has served me well. My main use-case has been sitting in planes reading books, though for whatever reason (gestures outside) I’ve not been doing that too much recently. My secondary use-case is quietly reading in bed.
I’ve long waved goodbye to the Amazon Kindle. I strip any DRM off any books that I buy (if they have DRM), and store them in .EPub format. I don’t need, nor want, Amazon’s bookstore service. Hence why I initially went with the Kobo.
The Kobo Aura One is a really, really good device. With continuing software updates, a large screen and decent backlight, it is very good indeed. So… why would I be interested in the Poke3?
Firstly, Overdrive, a way that I can borrow books from my local library, has now added magazines. The Kobo doesn’t support those (and that’s fine), but I rather enjoy The Economist every week and rather hoped that I could read it on something that wasn’t my large Android tablet.
Secondly, while I discovered how to add additional font faces to my Kobo, the display still isn’t quite as I’d like it. A recent book that I’m reading has full justification, which for a book is an idiotic design choice; however, I can’t override that decision on the Kobo if it’s baked into the book. I like being able to tweak and fiddle, and make a book look as readable as possible. I’ll read an older Paul Theroux book with the Linux Libertine font, a gloriously old-fashioned serif; and read a modern US book with Literata, Google’s crisp and clean serif font for ebook readers. The font has to match the book, in my mind. Yes, I’m this fiddly.
Step forward the Poke3.
The Onyx Boox Poke3 appealed to me because it is an eink reader, but it also runs Android. Android 10, to be precise. And since Libby (for Overdrive) and the insanely fiddly Moon+ Reader Pro both run on Android, I thought it might be worth a try.
The Poke3 also got my interest since it has a USB-C cable, rather than the older micro USB. I decided a few years ago that I don’t really want to buy anything else with a micro USB, given the amount of cables and leads I carry around with me is already annoying enough.
The initial experience
The device comes in quite good packaging: a minimal cardboard box with a tray inside, a charging cable and the device itself both wrapped in a soft plastic bag marked with a recycling code 7 CPE. (It turns out that this means it probably can’t be recycled but at least they’ve tried). A warranty card and a quick start guide (in 17 languages) are also included, using what appears to be non-bleached paper.
The device itself is tiny and light. It’s built well, with a glass-feeling front panel and no recesses to get gunk into. Both the front, and the plastic back, are fingerprint magnets, attracting the oil from your fingertips and making it look grubby almost immediately. The serial number is printed on the back of the device but looks to be coming off already. But it’s a nice device; the chin on it giving you somewhere to hold it that isn’t touching the screen.
For an Android device, it boots up very quickly: probably five seconds or so. Very impressive.
Enabling Android is not the best experience: but it isn’t the device’s fault. Google doesn’t allow eInk devices like this to gain Android certification, so it’s a bit fiddly to get it to access the Google Play store. There’s a menu option to register a Google GSFID to your Google account, which essentially identifies this non-verified device as yours. That takes an hour or so to percolate through Google’s systems.
But once that’s done, you get the normal Google Play store and you can install anything you like.
Once you do, hold-touch the icon for your chosen app, and choose the “Optimise" menu item. This allows you to change a few of the settings: the Poke3 likes to try to make the screen super-readable by changing the colours (it doesn’t normally work), and fiddling with the DPI (don’t let it).
This is not the kind of experience you’d give someone who wasn’t confident with computers, to be honest. It’s not helped by the English not being translated very well: which seems a shame and an unnecessary saving, given one day’s translation work is likely to be relatively cheap.
Anyway, after all of that, I now have both Moon+ Reader Pro, and Libby, on my device.
What’s it like then?
Well, I’m glad you asked. Moon+ Reader allows themes, so I’ve set two up: one which is white paper, black text; another which is the reverse for night-time. They both work very well indeed. The main experience of turning through pages, etc, works excellently with minimum refreshing.
Moon+ Reader also syncs the book and your reading position to your Google Drive, so I can open a new book on my phone and it’s relatively easy to then open it on the e-reader.
It’s a really nice, and endlessly configurable, experience.
I’ve not had it long enough to examine the battery life, but it doesn’t seem to use the battery too fast. That was my primary concern running Android, but it seems fine.
Libby is also good, if not perfect: the magazine display has an irritating lozenge blob which obscures a small part of the image of the magazine page. The blob is a button which actually reads READ ARTICLES and takes you to a text-only view, and given the miniscule size of print, it’s likely that I’ll be using that anyway, I suppose.
I’ve not yet used Libby for book reading, but my expectation is that it’s going to work just fine.
I’ve also reported the lozenge thing to the developer; they say that they may remove the button in a future update.
What about the inbuilt software?
There’s a “store”, but it only has about twenty free books in it, and they are all public domain.
The way to typically get a book onto this device, if you’re going to use the inbuilt reader, is to use the 'Transfer Books' app. This is a simple and clever thing: it gives you a web address to visit (and a QR code to type in). Visit that on your computer, and it connects to the inbuilt webserver in this tablet, so you can upload a file directly into your book reader: no wired connection necessary. Nice. It works fine from my Android phone. So should Android’s Nearby, I guess, but I’ve not tried it.
The inbuilt reader is called NeoReader and, well, look, I’m sure it’s fine for most people.
It also comes with a web browser, which I think is essentially the Android WebView; a calendar, an email service, a calculator, a clock, a music player, and other things that have no place on an ebook reader.
And what about the hardware?
There are two backlights. One is orange, and one is blue. Turn them on together and you get a white light. You have good control of the brightness level; my usual complaint with these is that the dimmest level is still just too bright for sitting in bed in the dark, and this one is just the same as the others. If only it had one more notch.
The power light has a blue LED in it, to reassure you when you turn it on that it’s doing something. It is a piercingly bright blue LED light, but to my eyes, everything that is a blue LED is piercingly bright, so I think it’s my eyes at fault.
Charging it is a little strange. It insists on turning itself on to charge, and goes through the entire boot sequence, so it can then display a charging level to you.
The screen, like any eInk reader, has a number of different settings that you can change the screen to. I’ve left it on the default basic setting, which acts like any decent screen reader; but if you really want to watch video on it, you can change it to something that works for that, I think.
It has Bluetooth, and apparently can connect to your headphones for audiobooks or other things. I’ve not yet tried.
So is it any good?
Yes. It’s very good, actually, as something that works as an ebook reader. The Moon+Reader integrates well, and syncs happily with my other devices. It won’t ever feel snappy, thanks to the display type, but seems to work surprisingly well for everything.
Would I buy it if I was just looking for a simple reader? No. I’d use a Kobo for that.
Would I buy it for a fun and extensible Android eInk tablet? Yes. And it’s a cheap toy for that sort of thing.